Welcome!

Blog

How to Use AIRLEGANT Home Air Purifier

  • Tuesday, Jun. 29, 2021 17:36:11
  • 0 Comments

How to Use AIRLEGANT Home Air Purifier

 

Before buying an AIRLEGANT home air purifier, you may want to know how to use it and all the tips about it. Now, let’s start.

 

What includes in the package?

 

Air Purifier Main Unit*1

HEPA Filter*1(inside the air purifier)

Power Adaptor*1

User Manual*1

 

How to get start?

 

1.Unpack the air purifier from the box, remove the plastic bag that covered on the main unit.

 

2.Upside down the air purifier, hold and rotate the filter cover anticlockwise to the “ON” sign, open and remove the plastic bag of the filter before use.

 

3.Plug in the connector to the power port at the bottom of the air purifier, make sure the connection is secure and put the power adaptor to the socket.

 

CONTROLS

 

Before Use: Please remove the plastic bag of the filter.

 

1.Any service other than regular cleaning or filter replacement should be performed by qualified electrician. Failure to comply could result in a voided warranty.

 

2.This air purifier must only be connected to the power adaptor along with the package with your country or region standard outlet.

 

3.If not in the room for a long time, please turn off the air purifier for energy saving and prolong the HEPA Filter's life time.

 

4.Avoid touching any moving parts within the air purifier. Never insert fingers or any other objects through the fan guard.

 

5.For maximum performance and safety, the minimum distance from a wall or objects should be 20cm, to keep the air inlet clear.

 

6.Do not place any object on top of the touch panel, in case of unintended activation.

 

Upside down the air purifier, hold and rotate the filter cover anticlockwise to the“ON”sign, open and remove the plastic bag of the filter before use. Reload the HEPA filter and secure the filter cover.

 

What’s the meaning of operation interface buttons?

 

ON/OFF: Press the“ON/OFF”button, the indicate light will turn from slightly bright to bright. At the same time the other button start to slightly bright.

 

Timer: Press the“Timer” button, the light will turn to bright; you can select 2h, 4h, 6h, 8h countdown and always-on mode. Once you finish the selection, the countdown time indicate light will turn on. Default starting up with always-on mode.

 

Fan Speed: Press the“Fan Speed” button, the light will turn to bright, with default Mid Wind. And you can select 4 different fan speed (High, Mid, Low, Sleep). When you set the fan speed at High, Mid, Low, the ambient light will turn on. Ambient light turn off at sleep mode.

 

Fan Speed: Press the “NAIs”button, indicate light will turn bright. The Negative-ion generator start to release NAIs. Press again to close it.

 

UVC: Press the “UV” button, the indicate light will turn bright. The UVC Sterilization Lamp will start to operate. Press again to close it. 

 

PLEAE DO NOT LOOK DIRECT TO THE UVC LAMP, HARMFUL TO EYES AND SKIN.

 

How to replace filter?

 

The HEPA filter life time is approximately 6-12 months (1500 hours), when the indicate light of 5 touch buttons start to blink while you turn on the air purifier. That is the notification of HEPA filter replacement.

 

1.Upside down the air purifier, and rotate the filter cover clockwise to the“ON” sign.

 

2.Pull out the filter cover.

 

3.Take out the old HEPA filter, and replace a new one.

 

4.After put down the filter, recover the filter cap. Clockwise and rotate to the “OFF” sign.

 

 

After you changed the HEPA filter. Press the ON/OFF button for over 10 seconds when the air purifier is on. The air purifier will automatically start to recalculate the filter life time.

Recent Comments

None

Post Comment

Your email address will not be published.Required fields are marked. *

Name*
E-mail*
Content*
CAPTCHA*